CEHISA Avant Edgebander


  • High speed edging performance
  • High gloss tracing system
  • Automatic unit setting options
  • Any combination of working units
  • Hot melt glue application
  • Touch screen control
  • DUO-MELT glue pot option for EVA and PUR adhesive
  • High frequency motors with independent inverters
  • Synchronised pressure beam
  • Air cleaned tracers
  • Fully enclosed working units


The Avant is the flag ship edgebander from CEHISA. Its uncompromising design is aimed at higher volume panel processers featuring increased feed speeds up to 20 m/min and automatic program selection for ultimate processing efficiency. Designed to meet the very highest demands of quality and flexibility the Avant can be equipped with the optional Air Jet edging system providing a seamless adhesion between edge and board with an absolute zero glue line.

Available in 5 separate models offering additional working units, the Avant range can be tailored to your exact production requirements with pre-milling, twin sets of top and bottom trimming units, corner rounding unit with two independent working units for the front and rear of the panel, radius scrapers, glue scrapers, buffing unit and grooving unit.

The radius scaping unit features has been completely redesigned to give perfect performance at faster feeds rates with high gloss tracers with a quick change adjustment for radius position.

The Avant is suitable for melamine, PVC, ABS, PP and veneer edging up to a thickness of 3mm and solid edge lippings up to 15mm incorporating automatic magazine feed. The optional DUO-MELT glue pot allows use of both traditional EVA and more technologically advanced PUR adhesives featuring a quick drain cleaning system for removing residual glue with minimum fuss.

The optional pneumatic quick set function allows each working unit to be instantly adjustment between 2 or 5 settings for instant change over between different tape thicknesses. Combined with the intuitive touch screen control, the operator can quickly recall set ups with the need for accessing the machine. The touch screen also provides access for monitoring all machine functions – start/ stop, program editing, parameters check and editing, alarm diagnostics etc all in real time.

Up to 60mm thick panels can be fed through the machine. An industrial chain-track system running on ground steel guides with non-marking traction pads ensure a positive feed without damaging the panel surface while the synchronised top pressure beam with two sets of rollers keeps the panel secured against the track. The track is electronically synchronised to activate each working unit without the need for physical triggers.


Edging material thickness 0.4 - 3 mm
Solid edging thickness 15 mm (with auto feed)
Panel thickness 8 - 60 mm
Panel length 120 - unlimited
Panel width 75 mm
Feed speed 20 m/min
Working pressure 6 - 7 kg/ cm2
Power 3 phase





Our suppliers have a policy of continuous product development and improvement, specifications are therefore subject to change without notice. We can accept no liability for discrepancies in specifications or illustrations contained in our publications or the publications of our suppliers.

Wadkin Ltd, Crossgate Drive, Queens Drive Industrial Estate, Nottingham, NG2 1LW


Monday - Friday 8:30am - 5:30pm

Saturday - By appointment only

Sunday - Closed

Find Us
Copyright © 2024 Wadkin Ltd | All rights reserved.