Phillipson DS30 Disc Sander
Features
- Manufactured in the UK
- Accurtilt vernier measurement to table positin and zero lock
- Extreme accuracy
- Quadrant guard
- No-volt release and overload protection
- Foot operated stop
call 0115 986 5201
Description
For fast and accurate sanding of flat and convex surfaces, featuring a swivelling cast aluminium disc guard with two aerodynamically designed extraction outlets which significantly reduce dust emissions. The heavy duty 30″ diameter disc is machined from heat treated aluminium to a tolerance of 0.08mm to eliminate vibration and disc run out. The large worktable tilts both ways by screw and handwheel fine adjustment and maintains a constant gap to the disc throughout its inclination. The worktable also wraps around the disc enabling sanding into square corners.
Specification
| Disc diameter | 760 mm |
| Accuracy (run out tolerance) | 0.08 mm |
| Table dimensions (with extensions) | 1000 x 365 mm |
| Table tilt | +/- 45º |
| Distance of table to top of disc | 435 mm |
| Extraction outlet diameter | 2 x 100 mm |
| Nett weight | 700 kg |
| Overall dimensions | 980 mm (L) x 1180 mm (W) x 1400 mm (H) |
| Motor | 5.5 kW |
| Power | 3 phase |
Literature
Phillipson sander range
Disclaimer
Our suppliers have a policy of continuous product development and improvement, specifications are therefore subject to change without notice. We can accept no liability for discrepancies in specifications or illustrations contained in our publications or the publications of our suppliers.
