Wadkin CW Hydraulic Crosscut

This is an entirely automatic crosscut specially developed for fast production. It is not an adaptation of an existing hand operated machine but has been designed throughout as a power-operated saw. As such it embodies many features to ensure speed of operation, quick adjustments, easy maintenance and dependability.
The potential output capacity of this machine over a wide range of work is considerably higher than any hand operated machine. This is due to the fact that the operator had always both hand free for speedy handling of the stock.


Specification

CW1 - 455 mm (18") HYDRAULIC - The saw carriage operated by hydraulic gear and controlled by foot pedal has variable forward speed of 1.5 - 36.5 m/min (5 - 120 fpm), brake to the saw spindle.  Two motors (3.7 kW (5 HP) to the saw spindle and 0.75 kW (1 HP to the feed)  (3 phase).  Capacity: Cuts 430  x 90 mm (17" x 3.5") or 325 x 140 mm (12.75" x 5.5").

CW2 - 455 mm (18") Hydraulic. The saw carriage is operated by hydraulic gear and controlled by foot pedal, having variable forward speed of 1.5 - 36.5 m/min (5 - 120 fpm), brake to saw spindle. Two motors 3.7 kW (5 HP) to saw and 0.75 kW (1 HP) to feed. Cuts 620 x 90 mm (24.5" x 3.5") or 520 x 140 mm (20.5" x 5.5").

CW2 - 505 mm (20") Hydraulic.  The saw carriage is operated by hydraulic gear and controlled by foot pedal, having variable forward speed of 1.5 - 36.5 m/min (5 - 120 fpm), brake to saw spindle. Two motors 5.5 kW (7.5 HP) to saw and 0.75 kW (1 HP) to feed. Cuts 660 x 114 mm (26" x 4.5") or 535 x 165 mm (21" x 6.5").


Information

VISIT OUR
NOTTINGHAM SHOWROOM
Wadkin Ltd, Crossgate Drive, Queens Drive Industrial Estate, Nottingham, NG2 1LW

OPENING HOURS

Monday - Friday 8:30am - 5:30pm

Saturday - By appointment only

Sunday - Closed

Find Us
Copyright © 2024 Wadkin Ltd | All rights reserved.