tel: 0870 850 9111
The Wadkin RS Lathe has a proved record for accuracy, convenience and efficiency. It has been installed in hundreds of the leading Engineers Pattern Shops throughout the world, where it has proved the ideal lathe for the general run of wood turning. Recent refinements in design have added to its value as a machine tool, by providing increased rigidity for the heavier classes of work, and ensuring greater convenience in operation.
RS 6" - GAP BED - 8 speeds, one pair of centres. 1.1 kW (1.5 HP) (3 phase). Capacity: Admits work up up to 305 mm (12") dia x 1065 mm (42") long; will swing 620 mm (24.5") dia x 305 mm (12") wide in the gap.
RS 8" - GAP BED LATHE - 4 speeds, one pair of centres. 1.1 kW (1.5 HP). Admits work up to 405 mm (16") dia x 1675 mm (66") long. Will swing 710 mm (28") dia by 305 mm (12") in the gap
RS 10" - GAP BED - 4 speeds, inside face plate and one pair of centres. 1.1 kW (1.5 HP) (3 phase). Capacity: Admits work up to 505 mm (20") dia x 2285 mm (90") long; will swing 810 mm (32") dia x 305 mm (12") wide in the gap.
Factory remanufactured equipment from Wadkin is of the very highest standards. Each machine is stripped down from the cutting edge to the machine frame and then reassembled with any worn or defective parts replaced, beds reground, all health and safety aspects fully adhered too and repainted inside and out (in any livery you choose). After comprehensive testing the result is virtually indistinguishable from new.