Wadkin BGP Panel Saw
The Wadkin Bursgreen BGP has been designed to satisfy the demand for a machine capable of accurate sawing of large boards and panels and when not required for this purpose to do the work of a general utility sliding table dimension saw.
The crosscut fence of entirely new design, incorporates a magnifying glass to the improved rule for extremely accurate read out. The fence extends the full width of the table ensuring maximum control of the workpieces a further aid to accuracy. It can be quickly swung clear when ripping large panels and is now telescopic, meaning a saving in valuale floor space.
Specification
BGP 1200 - 12" 300 mm (12") SLIDING TABLE PANEL SAW - Rise, fall and tilt saw, table 860 mm x 1500 mm (34" x 60") overall the left hand portion of which slides past the saw, rip fence, cross cut fence with stop bar and two stops. 2.2 kW (3 HP) (3 phase). Capacity: Cuts 95 mm (3.75") deep, saw to rip fence max 660 mm (26") (1270 mm (50") using extension table), max distance in front of saw when cutting 25 mm (1") deep is 1270 mm (50") and distance from saw to stops on sliding table is 2440 mm (96").
BGP1200S - 12" Rise, fall and tilt saw, table 860 x 1500 mm (34" x 60") overall the left hand portion of which slides past the saw, rip fence, cross cut fence with stop bar and two stops. 2.2 kW (3 HP) (3 phase). Capacity: Cuts 95 mm (3.75") deep, saw to rip fence (max) 660 mm (26"), max distance in front of saw when cutting 25 mm (1") deep is 1270 mm (50") and distance from saw to stops on sliding table is 2440 mm (96").
BGP1500 - 12" 300 mm (12") SLIDING TABLE PANEL SAW - Rise, fall and tilt saw, table 1120 x 1230 mm (44" x 48.5") overall the left hand portion of which slides past the saw, cross cut fence with stop bar and stops. 3.7 kW (5 HP) (3 phase). Capacity: Cuts 95 mm (3.75") deep; saw to rip fence (max) 660 mm (26"), (1500 mm (60") using extension table), max distance in front of saw when cutting 25 mm (1") deep is 1500 mm (60") and distance from saw to stops on sliding table is 3000 mm (120").
BGP1500S - 12" 300 mm (12") SLIDING TABLE PANEL SAW (WITH SCORING) - Rise, fall and tilt saw, table 1120 x 1230 mm (44" x 48.5") overall the left hand portion of which slides past the saw, cross cut fence with stop bar and stops. 3.7 kW (5 HP) (3 phase). Capacity: Cuts 95 mm (3.75") deep; saw to rip fence (max) 660 mm (26"), (1500 mm (60") using extension table), max distance in front of saw when cutting 25 mm (1") deep is 1500 mm (60") and distance from saw to stops on sliding table is 3000 mm (120").
Information
