tel: 0870 850 9111
The machine operates either chain or chisel which are mounted at opposite ends of one direct motorised headstock. The headstock rotates within the main frame to bring either the chain or chisel into the working position. The mortising stroke is air operated, ensuring fast rates of working.
Control is by foot pedal which also starts and stops the mortising tools. Length and speed of stroke is infinitely variable. Table has longitudinal and lateral movements controlled by handwheels. Pneumatic operation of the lateral movement can be provided. The machine is of substantial construction to withstand hard usage and give reliable service under all conditions.
MT - CHAIN OR CHISEL (AUTOMATIC - FOR PNEUMATIC OPERATION) - Chain and chisel heads mounted at opposite ends of rotating headstock giving speedy conversion from chain to chisel or vice versa. Mortising stroke air operated, length and speed of stroke infinitely variable, controlled by foot pedal. 3.7 kW (5 HP) (3 phase). Compound table with cramp, depth stop, chain grinder. Capacity: Admits timber 305 mm (12") deep x 230 mm (9") wide. Takes chains up to 32 mm (1.25") wide and chisels up to 25 mm (1") square.
Factory remanufactured equipment from Wadkin is of the very highest standards. Each machine is stripped down from the cutting edge to the machine frame and then reassembled with any worn or defective parts replaced, beds reground, all health and safety aspects fully adhered too and repainted inside and out (in any livery you choose). After comprehensive testing the result is virtually indistinguishable from new.