tel: 0870 850 9111

e-mail: info@wadkin.com

Wadkin Library

Images

Main Image for Wadkin GC Planer Moulder

Image for Wadkin GC Planer Moulder

Wadkin GC Planer Moulder

All GC models provide full moulding facilities and are fitted with individual motors to all cutting heads, providing the to achieve a perfect finish. The quality and versatility of these machines makes them unequalled value for money.

All adjustment controls are situated at the front of the machine for easy operation, electric rise and fall to beam, clutch for simultaneous top head adjustment, allows rapid setting.

Specification

GC 220 - 220 x 120 mm (9" x 5") 5-HEAD (WITH STRAIGHTENING) - Head sequence: Bottom/ top/ fence side/ near side/ second bottom. Power vertical adjustment to top head and pressures. Infinitely variable feed speed 6 - 20 m/min. Cutterblock speed 6000 rpm. Max size of finished timber 220 x 120 mm. Seven motors: 5.5 kW (7.5 HP) each to both bottoms and top head; 4 kW (5.5 HP) to fence side head; 7.5 kW (10 HP) to near side head; 1.5 kW (2 HP) to feed; 0.37 kW (0.5 HP) to rise and fall beam.

GC 230 - 230 x 130 mm (9" x 5") 4-HEAD (SHORT INFEED) - Head sequence: Bottom/ top/ fence side/ near side. Power vertical adjustment to top head and pressures. Infinitely variable feed speed 6 - 20 m/min. Cutterblock speed 6000 rpm. Max size of finished timber 220 x 120 mm. Six motors: 5.5 kW (7.5 HP) to bottom head; 7.5 kW (10 HP) to top head; 4 kW (5.5 HP) to fence side head; 5.5 kW (7.5 HP) to near sisde head; 1.5 kW (2 HP) to feed; 0.37 kW (0.5 HP) to rise and fall beam.

GC300 - 300 x 130 mm (12" x 5")  (SHORT INFEED) - Head sequence: Bottom, top, fence side, near side, second bottom.  Power vertical adjustment to top head and pressures.  Infinitely variable feed speed 6 - 20 m/min.  Cutterblock speed 6000 rpm.  Max size of finished timber 300 x 120 mm.  Seven motors: 11 kW (15 HP) each to both bottoms and top head, 5.5 kW (7.5 HP) to each vertical head, 3 kW (4 HP) to feed and 0.37 kW (0.5 HP) to rise and fall beam.

Factory Rebuilt

Factory remanufactured equipment from Wadkin is of the very highest standards. Each machine is stripped down from the cutting edge to the machine frame and then reassembled with any worn or defective parts replaced, beds reground, all health and safety aspects fully adhered too and repainted inside and out (in any livery you choose). After comprehensive testing the result is virtually indistinguishable from new.


Information

Wadkin GC 4 + 1 Planer Moulder Literature

Wadkin GC 300 Planer Moulder Literature

Wadkin GC Planer Moulder Manual and Parts List

Spare parts enquiry form