tel: 0870 850 9111


Wadkin Library


Main Image for Wadkin JTA Disc and Bobbin Sander

Image for Wadkin JTA Disc and Bobbin Sander

Wadkin JTA Disc and Bobbin Sander

This machine is a wonderful labour saver in any pattern shop, either large or small. It is particularly useful for those shops where available floor space, or the volume of work, does not justify separate Disc and Bobbin machines, combining as it does the functions of both types.

Both disc and bobbin can be used at the one time, and when only one is in use the other need not be running.


JTA - DISC & BOBBIN SANDER -  760 mm (30") dia sanding disc with tilt table 865 x 430 mm (34" x 17").  Disc press and two spare discs included. Vertical reciprocating sanding bobbin with tilt table 660 x 645 mm (26" x 25.5") for work up to 180 mm (7") deep. Two motors 3.7 kW (5 HP) to the disc and 0.75 kW (1 HP) to the bobbin.

Factory Rebuilt

Factory remanufactured equipment from Wadkin is of the very highest standards. Each machine is stripped down from the cutting edge to the machine frame and then reassembled with any worn or defective parts replaced, beds reground, all health and safety aspects fully adhered too and repainted inside and out (in any livery you choose). After comprehensive testing the result is virtually indistinguishable from new.


Wadkin JTA Disc and Bobbin Sander Literature

Wadkin JTA Disc and Bobbin Sander Manual and Parts List

Spare parts enquiry form