tel: 0870 850 9111

e-mail: info@wadkin.com

Wadkin Library

Images

Main Image for Wadkin DR 30 36 Bandsaw

Image for Wadkin DR 30 36 Bandsaw

Wadkin DR 30 36 Bandsaw

These machines are characterised by steady vibrationless running at high speed, essential for clean accurate sawing in hard or soft woods. The Main Frame is a heavy casting in one piece. The Spindles are mounted on heavy dustproof ball bearings.

The pulleys are most accurately balanced. The tensioning of the saw is automatically regulated by a spring, and a tracking device, actuated by handwheel and screw provided. An adjustable brush is fined, for keeping the face of the bottom saw pulley free from dust and chips.

Specification

DR 30" - 760 mm (30") - Tilt table 860 x 810 mm, brake. 2.2 kW (3 HP).  Capacity: 355 mm (14") under guide, throat 710 mm (28)".

DR 36" - 915 mm (36") dia wheels, tilt table 915 x 965 mm (36" x 38"), brake.  3.7 kW (5 HP).  Capacity: 470 mm (18.5") under guide, throat 865 mm (34").

Factory rebuilt

Factory remanufactured equipment from Wadkin is of the very highest standards. Each machine is stripped down and then reassembled with any worn or defective parts replaced, beds reground, all health and safety aspects fully adhered too and repainted inside and out (in any livery you choose). After comprehensive testing the result is virtually indistinguishable from new.


Information

Wadkin DR 30 36 Bandsaw Literature

Wadkin DR 30 36 Bandsaw Manual and Parts List

Spare parts enquiry form