tel: 0870 850 9111

e-mail: info@wadkin.com

Wadkin Products

Images

Main Image for Wadkin FSP Four Sided Planer

Image for Wadkin FSP Four Sided Planer

Wadkin FSP Four Sided Planer

The Wadkin FSP offers straightening, surfacing and thicknessing operations in one easy pass through the machine, saving time and space in comparison to traditional methods. The FSP includes a rigid 2 meter long infeed table providing a sound base for perfect straightening whilst giving maximum timber support.

Before and after the first bottom head the bed plates incorporate acoustically profiled nosing pieces for maximum noise reduction. The large 80 mm diameter outfeed bed roller is strategically placed on the centre line of the top driven feed roller for through feeding of indvidual pieces.

Specification

FSP 220 VARIABLE SPEED - THROUGH FEED 4-SIDE PLANER WITH STRAIGHTENING - Equipped with four 2-knife cutterheads to provide 4-side planing.  Max working capacity 230 x 130 mm.  Max finished work size 220 x 120 mm).  Infinitely variable feed speed 5 - 15 m/min.  Two metre straightening table, digital readouts to head movements and pneumatic feed works.  Four motors 4 kW (5.5 HP) each to first bottom and the top heads and a single 5.5 kW (7.5 HP) motor drives the two side heads, 1.5 kW (2 HP) to the feed.  (3 phase).

FSP220 SINGLE SPEED - THROUGH-FEED 4-SIDE PLANER WITH STRAIGHTENING - Equipped with four 2-knife cutterheads to provide 4-side planing.  Max working capacity 230 x 130 mm.  Max finished work size 220 x 120 mm.  Single speed 8 m/min.  Two metre straightening table, digital readouts to head movements and pneumatic feed works (cardan shaft).  Four motors: 5.5 kW (7.5 HP) each to the bottom and top heads, a single 5.5 kW (7.5 HP) motor drives the two side heads, 1.5 kW (2 HP) to the feed.  (3 phase).

FSP180 180 mm - THROUGH FEED 4-SIDE PLANER WITH STRAIGHTENING - Equipped with four 2-knife cutterheads to provide 4-side planing.  Max working capacity 180 x 120 mm.  Max finished work size 165 x 120 mm.  Infinitely variable feed speed 5 - 15 m/min.  Two metre straightening table, digital readouts to head movements and pneumatic feed works.  Four motors 4 kW (5.5 HP) each to first bottom and the top heads and a single 5.5 kW (7.5 HP) motor drives the two side heads, 1.5 kW (2 HP) to the feed.  (3 phase).

Factory Rebuilt

Factory remanufactured equipment from Wadkin is of the very highest standards. Each machine is stripped down from the cutting edge to the machine frame and then reassembled with any worn or defective parts replaced, beds reground, all health and safety aspects fully adhered too and repainted inside and out (in any livery you choose). After comprehensive testing the result is virtually indistinguishable from new.


Information

Wadkin FSP Four Sided Planer Literature

Wadkin FSP Four Sided Planer Manual and Parts List

Spare parts enquiry form