tel: 0870 850 9111

e-mail: info@wadkin.com

Wadkin Library

Images

Main Image for Wadkin NX Grinder

Image for Wadkin NX Grinder

Wadkin NX Grinder

Now the average worker can produce above-average cutters for perfectly matched mouldings. Tungsten Carbide tipped cutters can now be profile ground easily, at the same fast speed as high speed steel. Significantly more efficient than traditional methods, simple to operate and requires less skilled operators.

Specification

NX230 9" - For precision template grinding of moulding cutters in the cutterblock, machine includes a 40 mm arbor. (3 phase).  Capacity: Max length of cutter profile 230 mm (9"), max dia of cutting circle 305 mm (12"), max depth of profile obtained (depending on cutter thickness) 30 mm (1 3/16").

NXL230 9" (WITH LINEAR MOTION) - For precision template grinding of moulding cutters in the cutterblock, machine includes 40 mm arbor  (3 phase).  Capacity: Max length of cutter profile 230 mm (9"), max dia of cutting circle 305 mm (12"), max depth of profile obtained (depending on cutter thickness) 48 mm (1 3/16").  ? Check max depth of profile.

NZ300 - (Programmed for both manual and automatic operation). Accommodating knives up to 330 mm long and max cutterhead dia of 300 mm. Indexing for up to 30 knives in one cutterhead. Automatic incremental feed, rough finish and sparkout grinding. Single line LCD. Specification includes self-contained  recirculating flow coolant system, magnettic filter, arbor, grinding wheels, etc.  (3 phase).

Factory Rebuilt

Factory remanufactured equipment from Wadkin is of the very highest standards. Each machine is stripped down from the cutting edge to the machine frame and then reassembled with any worn or defective parts replaced, beds reground, all health and safety aspects fully adhered too and repainted inside and out (in any livery you choose). After comprehensive testing the result is virtually indistinguishable from new.


Information

Wadkin NX Grinder Literature

Wadkin NX Grinder Manual and Parts List

Spare parts enquiry form