tel: 0870 850 9111

e-mail: info@wadkin.com

Wadkin Products

Images

Main Image for Phillipson DS Disc Sander

Image for Phillipson DS Disc Sander Image for Phillipson DS Disc Sander

Phillipson DS Disc Sander

For fast and accurate sanding of flat and convex surfaces, featuring a swivelling cast aluminium disc guard with two aerodynamically designed extraction outlets which significantly reduce dust emissions.

The heavy duty 16" diameter disc is machined from heat treated aluminium to a tolerance of 0.08mm to eliminate vibration and disc run out. The large worktable tilts both ways by screw and handwheel fine adjustment and maintains a constant gap to the disc throughout its inclination. The worktable also wraps around the disc enabling sanding into square corners.

Specificaiton

DS16 16" 405 mm - single aluminium disc with canting table.  3 kW (4 HP)  (3 phase).  Optional extra: Mitre fence  £POA

DS24 24" 610 mm - single aluminium disc with 840 x 300 mm tilting table (plus or minus 45 degrees) with hand wheel adjustment.  2.2 kW (3 HP) (3 phase).  Optional extra: Mitre fence  £POA

DS30 30" 760 mm - single steel disc with 1000 x 365 mm tilting table (plus 30 degrees, minus 45 degrees) with hand wheel adjustment. 5.5 kW (7.5 HP)  (3 phase).  Optional extra: Mitre fence  £POA 

DDS24 24" 610 mm - double aluminium discs with 840 x 300 mm tilting table (plus or minus 45 degrees) with hand wheel adjustment each side.  2.2 kW (3 HP)  (3 phase).  Optional extra: Mitre fence  £POA 

DDS30 30" 760 mm - double steel discs with 1000 x 365 mm tilting table (plus 30 degrees, minus 45 degrees) with hand wheel adjustment.  5.5 kW (7.5 HP)  (3 phase).  Optional extra: Mitre fence  £POA


Information

Phillipson Sander Literature

Enquiry form