tel: 0870 850 9111

e-mail: info@wadkin.com

Wadkin Products

Images

Main Image for Wadkin CP Panel Saw

Image for Wadkin CP Panel Saw

Wadkin CP Panel Saw

With a precision ground fixed table and wider sliding table than any other similar sized machine, it's not surprising that the CP range is so popular. The five models in the range offer complete flexibility not only in the size of panel capable of being processed but also materials.

These heavy duty canting table saws are capabel of cutting panels, boards, solid timber, plastics and 'soft' metals - all with the same accuracy and efficiency.

Specification

CP12 1200 mm - SLIDING TABLE PANEL SAW (WITH SCORING) - Rise, fall and tilt saw, fixed table 1065 x 737 mm (42" x 29"), sliding table 1350 x 1300 mm (53" x 51"), fitted with cross cut fence with stop bar and two stops.  4 kW (5.5 HP)  (3 phase).  Capacity:  Takes sawblades 400 mm (16") dia and cuts 125 mm (5") deep, saw to rip fence (max) 1250 mm (50"), max distance in front of saw when cutting 25 mm (1") deep is 1250 mm (50") and distance from saw to stops on sliding table is 2500 mm (98").

CP160 1600 mm - SLIDING TABLE PANEL SAW (WITH SCORING) - Rise, fall and tilt saw, fixed table 1065 x 745 mm (42" x 29"), sliding table 340 x 1600 mm (13.25" x 63"), fitted with outrigger table, crosscut fence with stop bar and two stops.  4 kW (5.5 HP) main motor and 0.55 kW (0.75 HP) to scorer.  (3 phase).  Capacity: Takes sawblades 400 mm (16") dia and cuts 125 mm (5") deep; Saw to rip fence (max) 1250 mm (50"); Max panel size 1600 mm x 3200 mm; Distance from saw to stops on sliding table 3200 mm (125").

CP25 2500 mm - SLIDING TABLE PANEL SAW (WITH SCORING) - Rise, fall and tilt saw, fixed table on right of saw and sliding table 2500 mm (98") long, fitted with cross cut fence, stop bar and stops.  4 kW (5.5 HP)  (3 phase).  Capacity: Takes sawblades 400 mm (15.75") dia and cuts 125 mm (5") deep; saw to rip fence (max) 915 mm (36"), max length of cut using sliding table 2500 mm (98") and max distance saw to stop on cross cut fence is 2500 mm (98").

CP32 3200 mm - SLIDING TABLE PANEL SAW (WITH SCORING) - Rise, fall and tilt saw, fixed table on right of saw and sliding table 3200 mm (125") long, fitted with crosscut fence, stop bar and stops.  4 kW (5.5 HP)  (3 phase).  Capacity: Takes sawblades 400 mm (15.75") dia and cuts 125 mm (5") deep; saw to rip fence (max) 915 mm (36"); max length of cut using sliding table 3200 mm (125"); max distance saw to stop on crosscut fence 3200 mm (125").

Factory Rebuilt

Factory remanufactured equipment from Wadkin is of the very highest standards. Each machine is stripped down from the cutting edge to the machine frame and then reassembled with any worn or defective parts replaced, beds reground, all health and safety aspects fully adhered too and repainted inside and out (in any livery you choose). After comprehensive testing the result is virtually indistinguishable from new.


Information

Wadkin CP Panel Saw Literature

Wadkin CP Panel Saw Manual and Parts List

Spare parts enquiry form