tel: 0870 850 9111
This is a handy compact machine capable of handling cabinet work, light door work, sash stuff, etc., at high rates of production. It has been specially designed for fast, easy operation. Adjustments are readily accessible and easy to make.
It is completely modern in design and is both economical in first cost and in maintenance. The machine will tenon, scribe the shoulders and cut off to length at one pass of the table. It will take timber 14" wide by 4 1/2" deep and cut tenons up to 5" long at one pass.
WITH TOP & BOTTOM SCRIBERS & REAR CUT OFF SAW - Brakes to the tenon heads. Five 1.5 kW (2 HP) motors (3 phase). Capacity: Admits timber up to 355 x 115 mm (14" x 4.5") and cuts tenons up to 127 mm (5") long in one operation.
Factory remanufactured equipment from Wadkin is of the very highest standards. Each machine is stripped down to the machine frame and then reassembled with any worn or defective parts replaced, beds reground, all health and safety aspects fully adhered too and repainted inside and out (in any livery you choose). After comprehensive testing the result is virtually indistinguishable from new.